Blog / XuFeng Tool Tech Group Limited

Previous slide

Next slide

Home

Blog

Consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco.

主图：prototype vs low volume production decision path

Prototype vs Low-Volume Production: How to Choose the Right Manufacturing Method

Introduction Choosing the right manufacturing method is not only about quantity. For custom metal and plastic

主图：dfm tolerance review for custom cnc machined parts

How Tight Tolerances Increase Custom Part Manufacturing Cost

Introduction Tight tolerances are necessary when a custom part must fit, seal, rotate, slide, align or

主图：cnc machined aluminum parts before and after anodizing.

How Anodizing Affects CNC Machined Aluminum Parts

Introduction Anodizing is one of the most common surface finishes for CNC machined aluminum parts.

How to Avoid Bending Interference in Sheet Metal Parts

Introduction Bending interference, also called press brake crashing, is one of the most common hidden risks

主图：injection molded plastic part sink mark inspection

How to Avoid Sink Marks in Injection Molded Plastic Parts

Introduction Sink marks are one of the most common defects in injection molded plastic parts. They

主图：deep cavity cnc machining for custom parts

Deep Cavity CNC Machining: Design Risks and Process Solutions

Introduction Deep cavity CNC machining is commonly used for custom aluminum housings, valve bodies, robotic components,